��\����8�D)8n4�>�<	IX	9�	?�	6
S
/s
/�
1�
3,M!z$�$��$.)&X' �	�$�j�_b
�
&�
d8e3�#�"�#="[/~��"�!*L#i�(��)�+FNh�4�6��$8 Xy������	8G/b�����
 <Rj���%�	�q
�h=@�4�43:h7�C�4=T:��%�%
23f$w0��.�/*G)r8�)�2�+2^g_�J�/*CLn?�9�$5Z!x��%��)Ea}��3�"#)'Mu~�
�/�7� "4 W !s � � � � � � !!$!
:!H!)^!�!�!�!�!�!�!"""8"N"d"t"�"$�"�"
YV='*A
D0T5M:?W8U-F@[7B;9.>Z\)%$H&RL3S/CJI"KN<X(2OE+!6	,1PGQ4 #

Report bugs to <%s>.
  -?, --help                  show this help, then exit
  -V, --version               output version information, then exit
  -e, --exit-on-error         exit immediately on error
  -i, --ignore=RELATIVE_PATH  ignore indicated path
  -m, --manifest-path=PATH    use specified path for manifest
  -n, --no-parse-wal          do not try to parse WAL files
  -q, --quiet                 do not print any output, except for errors
  -s, --skip-checksums        skip checksum verification
  -w, --wal-directory=PATH    use specified path for WAL files
"%s" has size %zu on disk but size %zu in the manifest"%s" is not a file or directory"%s" is present in the manifest but not on disk"%s" is present on disk but not in the manifest"\u" must be followed by four hexadecimal digits.%s home page: <%s>
%s verifies a backup against the backup manifest.

Character with value 0x%02x must be escaped.Escape sequence "\%s" is invalid.Expected "," or "]", but found "%s".Expected "," or "}", but found "%s".Expected ":", but found "%s".Expected JSON value, but found "%s".Expected array element or "]", but found "%s".Expected end of input, but found "%s".Expected string or "}", but found "%s".Expected string, but found "%s".Options:
The input string ended unexpectedly.The program "%s" is needed by %s but was not found in the
same directory as "%s".
Check your installation.The program "%s" was found by "%s"
but was not the same version as %s.
Check your installation.Token "%s" is invalid.Try "%s --help" for more information.
Unicode escape values cannot be used for code point values above 007F when the encoding is not UTF8.Unicode high surrogate must not follow a high surrogate.Unicode low surrogate must follow a high surrogate.Usage:
  %s [OPTION]... BACKUPDIR

WAL parsing failed for timeline %u\u0000 cannot be converted to text.backup successfully verified
both pathname and encoded pathnamecannot duplicate null pointer (internal error)
checksum mismatch for file "%s"checksum without algorithmcould not close directory "%s": %mcould not close file "%s": %mcould not open directory "%s": %mcould not open file "%s": %mcould not parse backup manifest: %scould not read file "%s": %mcould not read file "%s": read %d of %zucould not stat file "%s": %mcould not stat file or directory "%s": %mduplicate pathname in backup manifest: "%s"error: expected at least 2 linesexpected version indicatorfatal: file "%s" has checksum of length %d, but expected %dfile "%s" should contain %zu bytes, but read %zu bytesfile size is not an integerinvalid checksum for file "%s": "%s"invalid manifest checksum: "%s"last line not newline-terminatedmanifest checksum mismatchmanifest ended unexpectedlymanifest has no checksummissing end LSNmissing pathnamemissing sizemissing start LSNmissing timelineno backup directory specifiedout of memory
timeline is not an integertoo many command-line arguments (first is "%s")unable to decode filenameunable to parse end LSNunable to parse start LSNunexpected array endunexpected array startunexpected file fieldunexpected manifest versionunexpected object endunexpected object fieldunexpected object startunexpected scalarunexpected wal range fieldunknown toplevel fieldunrecognized checksum algorithm: "%s"warning: Project-Id-Version: pg_verifybackup (PostgreSQL) 13
Report-Msgid-Bugs-To: pgsql-bugs@lists.postgresql.org
PO-Revision-Date: 2020-06-22 16:00+0800
Last-Translator: Jie Zhang <zhangjie2@cn.fujitsu.com>
Language-Team: Chinese (Simplified) <zhangjie2@cn.fujitsu.com>
Language: zh_CN
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

臭虫报告至<%s>.
  -?, --help                  显示此帮助，然后退出
  -V, --version               输出版本信息，然后退出
  -e, --exit-on-error         出错时立即退出
  -i, --ignore=RELATIVE_PATH  忽略指定的路径
  -m, --manifest-path=PATH    使用清单的指定路径
  -n, --no-parse-wal          不试图解析WAL文件
  -q, --quiet                 不打印任何输出，错误除外
  -s, --skip-checksums        跳过校验和验证
  -w, --wal-directory=PATH    对WAL文件使用指定路径
"%s"在磁盘上有大小%zu，但在清单中有大小%zu"%s"不是文件或目录清单中有"%s"，但磁盘上没有磁盘上有"%s"，但清单中没有"\u" 后必须紧跟有效的十六进制数数字%s 主页: <%s>
%s 根据备份清单验证备份.

值为 0x%02x 的字符必须进行转义处理.转义序列 "\%s" 无效.期望是"," 或 "]"，但发现结果是"%s".期望是 "," 或 "}"，但发现结果是"%s".期望得到 ":"，但发现结果是"%s".期望是JSON值, 但结果发现是"%s".期望为数组元素或者"]"，但发现结果是"%s".期望输入结束，结果发现是"%s".期望是字符串或"}"，但发现结果是"%s".期望是字符串, 但发现结果是"%s".选项:
输入字符串意外终止.%2$s需要程序"%1$s"
但在与"%3$s"相同的目录中找不到该程序.
检查您的安装.程序"%s"是由"%s"找到的
但与%s的版本不同.
检查您的安装.令牌 "%s" 无效.请用 "%s --help" 获取更多的信息.
当编码不是UTF8时，大于007F的码位值不能使用Unicode转义值.Unicode 的高位代理项不能紧随另一个高位代理项.Unicode 代位代理项必须紧随一个高位代理项.用法:
  %s [选项]... BACKUPDIR

时间线%u的WAL解析失败\u0000不能被转换为文本。备份已成功验证
路径名和编码路径名无法复制空指针 (内部错误)
文件"%s"的校验和不匹配校验和没有算法无法关闭目录 "%s": %m无法关闭文件 "%s": %m无法打开目录 "%s": %m无法打开文件 "%s": %m清单校验和不匹配: %s无法读取文件 "%s": %m无法读取文件"%1$s"：读取了%3$zu中的%2$d无法取文件 "%s" 的状态: %m无法统计文件或目录"%s": %m备份清单中的路径名重复: "%s"错误: 至少需要2行预期的版本指示器致命的:文件"%s"的校验和长度为%d，但应为%d文件"%s"应包含%zu到字节，但读取到%zu字节文件大小不是整数文件"%s"的校验和无效: "%s"清单校验和无效: "%s"最后一行未以换行符结尾清单校验和不匹配清单意外结束清单没有校验和缺少结束LSN缺少路径名缺少大小缺少起始LSN缺少时间线未指定备份目录内存溢出
时间线不是整数命令行参数太多 (第一个是 "%s")无法解码文件名无法解析结束LSN无法解析起始LSN意外的数组结束意外的数组开始意外的文件字段意外的清单版本意外的对象结束意外的对象字段意外的对象开始意外的标量意外的wal范围字段未知的顶层字段无法识别的校验和算法: "%s"警告: